Brand New Southwest Speed Chevy 365 Bellhousing to fit 11" Clutches (SWS Part # 650-3970) > This Reproduced bellhousing has the GM # 3733365 Stamped on the Bellhousing > This Southwest Speed 11" Performance Cast Bellhousing is a reproduction of the original 3733365 bellhousing used on GM models with Big Block and Small Block engines equipped with an 11" clutch
This performance bellhousing has the GM Part # 3733365 casting number stamped on the outside of the bellhousing just like the original > If you are doing a restoration of an Classic Chevy muscle car, or just want the original 365 bellhousing to finish that rod project, this bellhousing is the perfect part
Features: > Factory Reproduction 3733365 Bellhousing > 3733365 Stamped on Bellhousing > Cast Aluminum Housing > Build Date: November 19th, 1955 > 3/8" Diameter holes for transmission to engine bolts > 1/2"-13 Tapped holes for the Transmission > 3/8"-16 Tapped holes for the Starter > Includes Five 1/4"-28 threaded bolts for the upper flywheel inspection Shield and lower dust cover > Works with GM transmissions with a 4.675" O.D. Bearing Retainer > 7/16" Diameter Holes for Z-Bar bracket
Factory Applications: | Chevy: > 1955-1957 150 with V-8 Engines > 1955-1957 210 with V-8 Engines > 1955-1957 Bel Air with V-8 Engines > 1955-1959 Corvette with V-8 Engines > 1957 Del Ray with V-8 Engines > 1955-1957 Nomad with V-8 Engines > 1955-1957 Sedan Delivery with V-8 Engines > *With Manual Transmissions and 168 tooth Flywheel
Note: This bellhousing will fit all of the models listed above regardless of the bellhousing build date > This bell housing however Will Not Fit Trucks or Inline 6 Cylinder Engines > The bellhousing was used with 4 speed transmissions in all 1955-1957 Chevy 150's, 210's, Nomad's, Sedan Delivery's, and 1957 Del Ray's, as well as 1955-1959 Corvette's with SBC Engines except Trucks, and Models with Inline 6 Cylinder Engines, but will fit any GM transmission that measures 4.675" and an 11" clutch